Home Page
 
Syntec Diamond Tools provides the right blade for the job everytime. Our collective industry experience spans over forty years.
 
 
 
HS10 Medium - Hard Reinforced Concrete
For cutting hard non abrasive material, including: reinforced concrete, hard clay brick, terarazzo
Wet or Wet/Dry Cutting
HS30 General Purpose Concrete / Masonry
For general purpose cutting of cured concrete, brick, masonry & stone
Wet or Wet/Dry Cutting
HS50 Combination Concrete / Abrasive
Combination blade for concrete & some asphalt, green concrete & abrasive block
Wet or Wet/Dry Cutting
HS90 Abrasive Block / Asphalt
For cutting abrasive materials including: asphalt, green concrete, block & sandstone
Wet or Wet/Dry Cutting
 
Available Segment Heights
Segment Height HS10 HS30 HS50 HS90
12mm .480"
10mm .400"
9mm .360"
8mm .320"
7mm .280"
 
Available Configurations
Normal
Split Segment
U Gullet
Turbo Segmented
Available Sizes *All blades available in silent or standard core
12" x .110 - 305 x 2.8 14" x .125 - 355 x 3.2 18" x .125 - 456 x 3.2
12" x .120 - 305 x 3.0 14" x .140 - 355 x 3.6 18" x .140 - 456 x 3.6
12" x .125 - 305 x 3.2 16" x .110 - 405 x 2.8 18" x .155 - 456 x 3.9
12" x .140 - 305 x 3.6 16" x .120 - 405 x 3.0 20" x .125 - 510 x 3.2
14" x .110 - 355 x 2.8 16" x .125 - 405 x 3.2 20" x .140 - 510 x 3.6
14" x .120 - 355 x 3.0 16" x .140 - 405 x 3.6 20" x .155 - 510 x 4.0
     
       
USA 760-737-7407   or  1-866-360-3607
AUS + 61 8 8395 0277
USA 760-737-6718
AUS + 61 8 8395 1761
sales@syntecdiamond.com