Home Page
 
Syntec Diamond Tools provides the right blade for the job everytime. Our collective industry experience spans over forty years.
 
 
 
R10 Very High Alumina 90% +
Designed for cutting extremely hard non abrasive materials
Recommended for Wet use only
R30 High Alumina 70 - 90%
Designed for cutting hard non abrasive materials with an Alumina content of between 70% and 90%
Available in Wet & Wet/Dry Cutting
R50 General Purpose Medium Alumina 30-70%
Designed for cutting general purpose materials with an alumina content of between 30% and 70%
Available in Wet & Wet/Dry Cutting
R90 Carbon Block
Designed for cutting Carbon Block
Available in Wet & Wet/Dry Cutting
R100 Silicon Carbide
Designed for cutting extremely hard and abrasive material Silicon Carbide
Recommended for Wet use only
 
Available Segment Heights
Segment Height R10 R30 R50 R90 R100
12mm .480"
10mm .400"
9mm .360"
8mm .320"
7mm .280"
 
Available Configurations
Laminated Silent
Available Sizes *All blades available in silent or standard core
12" x .120 - 305 x 3.0 14" x .125 - 355 x 3.2 20" x .140 - 510 x 3.6
12" x .125 - 305 x 3.2 16" x .120 - 405 x 3.0 24" x .140 - 610 x 3.6
12" x .140 - 305 x 3.6 16" x .125 - 405 x 3.2 24" x .155 - 610 x 4.0
14" x .120 - 355 x 3.0 20" x .125 - 510 x 3.2  
     
       
USA 760-737-7407   or  1-866-360-3607
AUS + 61 8 8395 0277
USA 760-737-6718
AUS + 61 8 8395 1761
sales@syntecdiamond.com