Home Page
 
Syntec Diamond Tools provides the right blade for the job everytime. Our collective industry experience spans over forty years.
 
 
 
PHS10 Critically Hard Reinforced Concrete
For cutting critically hard material including: precast panels, heavily reinforced concrete, concrete pipes
Wet use Only
PHS30 Medium - Hard Reinforced Concrete
For cutting hard non-abrasives material including: reinforced concrete, hard clay brick, terrazzo
Wet use Only
PSH50 General Purpose Concrete / Masonry
For general purpose cutting of cured concrete, brick, masonry & stone
Wet use only
PHS90 Abrasive Block / Asphalt
For cutting abrasive materials including: aslphalt, green concrete, block & sandstone
West use only
 
Available Segment Heights
Segment Height PHS10 PHS30 PSH50 PHS90
12mm .480"
10mm .400"
9mm .360"
8mm .320"
7mm .280"
 
Available Configurations
Normal
Split Segment
U Gullet
Available Sizes *All blades available in silent or standard core
12" x .110 - 305 x 2.8 14" x .125 - 355 x 3.2 18" x .125 - 456 x 3.2
12" x .120 - 305 x 3.0 14" x .140 - 355 x 3.6 18" x .140 - 456 x 3.6
12" x .125 - 305 x 3.2 16" x .110 - 405 x 2.8 18" x .155 - 456 x 3.9
12" x .140 - 305 x 3.6 16" x .120 - 405 x 3.0 20" x .125 - 510 x 3.2
14" x .110 - 355 x 2.8 16" x .125 - 405 x 3.2 20" x .140 - 510 x 3.6
14" x .120 - 355 x 3.0 16" x .140 - 405 x 3.6 20" x .155 - 510 x 4.0
     
       
USA 760-737-7407   or  1-866-360-3607
AUS + 61 8 8395 0277
USA 760-737-6718
AUS + 61 8 8395 1761
sales@syntecdiamond.com